Electric Park Brake Service Mode Activation And Deactivation (G2186305): Deactivation
CAUTION:
This procedure requires the vehicle in the Park or Neutral position, with the ignition turned ON (the engine must be OFF) and the parking brake system in Service Mode.
- Press and hold the parking brake switch in the apply position.
- Wait one second.
- Press and hold the accelerator pedal in the wide open throttle position.
- Wait one second.
- Switch the ignition OFF and back ON immediately.NOTE: An audible noise will be heard to confirm that the parking brake has been released from the Service Mode.
- Release the accelerator pedal and release the parking brake switch to the neutral position.