Brake Fluid Reservoir (G2172300): Installation

The following step(s) applies to: 

All vehicles

1. CAUTION: Make sure that new seals are installed.
   • Install new brake fluid reservoir seals.

     Renew Part: Brake master cylinder seal(s) Quantity: 2  .

   • Install the brake fluid reservoir.
   • Install the retaining pin.

   The following step(s) applies to: 

   Vehicles with manual transmission

2. Connect the clutch fluid line.
3. Bleed the clutch hydraulic system.

   Refer to: CLUTCH SYSTEM BLEEDING .

   The following step(s) applies to: 

   All vehicles

4. Bleed the brake system.

   Refer to: BRAKE SYSTEM BLEEDING .

5. Install the cowl panel.

Refer to: COWL PANEL .