Lower Arm (G1274504): Removal
CAUTION:
- LH illustration shown, RH is similar.
- The final tightening of the suspension components must be completed with the vehicle on its wheels.
NOTE:
- Before commencing work on the vehicle make sure the park brake is in the off position.
- Removal steps in this procedure may contain installation details.
- Raise and lower the vehicle on a 4 post ramp.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Remove the wheel and tire. For additional information, Refer to: WHEEL AND TIRE
Release the spring and damper assembly from the lower arm.
Release the stabilizer bar link.
-
CAUTION:
- Do not allow the brake caliper to hang on the brake hose.
- Discard the bolts.
Remove and discard the bolts and tie the brake caliper aside.
Release the lower arm from the wheel hub assembly.
Remove the lower arm.