LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Cooling - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Cooling - V6 S/C 3.0L Petrol (G1780785) >> Removal And Installation >> Coolant Pump (G1781023) >> Installation

Coolant Pump (G1781023): Installation

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Observe correct installation of the coolant pump to oil cooler tube o-ring seals. Failure to do so may result in coolant loss.
    G13880140Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Make sure that the coolant pump to oil cooler tube o-ring seals are correctly installed.

  2. CAUTION:
    • Make sure that the gaskets are correctly located.
    • Install new O-ring seals.
    NOTE: Install new gaskets.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals