LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1514894) >> Removal And Installation >> Right Heated Oxygen Sensor (G1550199) >> Removal

Right Heated Oxygen Sensor (G1550199): Removal

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: RIGHT CATALYTIC CONVERTER
  3. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    G13974189Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Using the special tool, remove the Heated Oxygen Sensor (HO2S).

    Special Tool(s): JLR-303-1666 

    Torque  : 48 Nm 

scientia non olet · About LEMON Manuals