Left Heated Oxygen Sensor (G1550198): Removal
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe due care when working near a hot exhaust system.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: LEFT CATALYTIC CONVERTER - AWD
-
CAUTION: Make sure that the mating faces are clean and free of foreign material.
Using the special tool, remove the Heated Oxygen Sensor (HO2S).
Special Tool(s): JLR-303-1666
Torque : 48 Nm