LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1514894) >> Removal And Installation >> Engine Oil Level Sensor (G1550194) >> Removal

Engine Oil Level Sensor (G1550194): Removal

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: ENGINE OIL VACUUM DRAINING AND FILLING (G1280232)
  3. CAUTION:
    • Be prepared to collect escaping fluids.
    • Before the disconnection or removal of any components, make sure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
    G11285164Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 12 Nm 

scientia non olet · About LEMON Manuals