Heated Oxygen Sensor DATALOGGER Signals
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
| PID | DESCRIPTION | ACTION |
|---|---|---|
| BANK 1 | ||
| Datalogger signal for Heated Oxygen Sensor (HO2S) - Pre catalyst - Bank 1 sensor 1 | ||
| 0x03A1 | Oxygen Sensor (O2S) Heater Duty Cycle Bank 1 Sensor 1 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a duty cycle displayed in % varying between limits |
| 0xF434 | Oxygen Sensor Current Bank 1 sensor 1 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in mA varying between limits |
| Datalogger signal for Heated Oxygen Sensor (HO2S) - Mid catalyst - Bank 1 sensor 2 | ||
| 0x03A2 | Oxygen Sensor (O2S) Heater Duty Cycle Bank 1 Sensor 2 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a pulse width modulated signal digital output operating between 0 and 1 |
| 0xF415 | Oxygen Sensor Output Voltage Bank 1 - sensor 2 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in volts varying between limits |
| Datalogger signal for Heated Oxygen Sensor (HO2S) - Post catalyst - Bank 1 sensor 3 | ||
| 0x03A3 | Oxygen sensor heater duty cycle - Bank 1 sensor 3 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a pulse width modulated signal digital output operating between 0 and 1 |
| 0xF416 | Oxygen Sensor Output Voltage Bank 1 - sensor 3 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in volts varying between limits |
| BANK 2 | ||
| Datalogger signal for Heated Oxygen Sensor (HO2S) - Pre catalyst - Bank 2 sensor 1 | ||
| 0x03A4 | Oxygen Sensor (O2S) Heater Duty Cycle Bank 2 Sensor 1 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a duty cycle displayed in % varying between limits |
| 0xF438 | Oxygen Sensor Current Bank 2 sensor 1 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in mA varying between limits |
| Datalogger signal for Heated Oxygen Sensor (HO2S) - Mid catalyst - Bank 2 sensor 2 | ||
| 0x03A5 | Oxygen Sensor (O2S) Heater Duty Cycle Bank 2 Sensor 2 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a pulse width modulated signal digital output operating between 0 and 1 |
| 0xF419 | Oxygen Sensor Output Voltage Bank 2 - sensor 2 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in volts varying between limits |
| Heated Oxygen Sensor (HO2S) - Post catalyst - Bank 2 sensor 3 | ||
| 0x03A6 | Oxygen sensor heater duty cycle - Bank 2 sensor 3 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is a pulse width modulated signal digital output operating between 0 and 1 |
| 0xF41A | Oxygen Sensor Output Voltage Bank 2 - sensor 3 | Using the manufacturer approved diagnostic system check datalogger signal. The signal is displayed in volts varying between limits |