Low Pressure Fuel Pump Assembly : Installation

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:
- Take extra care not to damage the fuel tank level sensor float and arm.
- Make sure that the fuel pump and sender unit are correctly installed on to the retaining bayonet bracket in the fuel tank.
- Make sure the fuel tank level sensor arm moves from the full, to the empty position freely and all the pipes are clear of it's path.
NOTE:
- Make sure the locating tang is installed in the correct position.
- Remove and discard all blanking caps.
To install, reverse the removal procedure.