High Pressure Fuel Pump 2 - RWD (G1280007): Removal
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Make sure that tools and equipment are clean, free of foreign material and lubricant.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS
- Refer to: FUEL SYSTEM PRESSURE RELEASE - V6 S/C 3.0L PETROL/V8 S/C 5.0L PETROL
- Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Refer to: ENGINE COVER - V8 S/C 5.0L PETROL
- Refer to: ENGINE OIL VACUUM DRAINING AND FILLING (G1779628)
- Refer to: FUEL INJECTION COMPONENT CLEANING (G1202495)
-
CAUTION: Be prepared to collect escaping fluids.
- Refer to: RIGHT AIR CLEANER (G1549757)
-
CAUTION:
- Be prepared to collect escaping fluids.
- Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
-
CAUTION:
- Be prepared to collect escaping fluids.
- Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: RIGHT ENGINE MOUNT (G1271918)
- Refer to: GENERATOR - V8 S/C 5.0L PETROL
-
NOTE: Engine shown removed for clarity.
-
NOTE: Engine shown removed for clarity.
-
NOTE: Engine shown removed for clarity.
-
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
-
CAUTION:
- Remove and discard the high-pressure fuel supply lines.
- Be prepared to collect escaping fluids.
- Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE: Engine shown removed for clarity. -
CAUTION: Be prepared to collect escaping fluids.
Loosen the Torx screws a turn each at a time.
-
CAUTION: Be prepared to collect escaping fluids.