Fuel Pump Driver Module (G2788074): Removal
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the 12 V system.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Raise and support the vehicle.
Refer to: LIFTING
Disconnect the electrical connector.
- Remove the fastener.
- Remove the Fuel Pump Driver Module (FPDM).