LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Fuel Charging And Controls - V6 S/C 3.0L Petrol -- XJ/X351) >> Fuel Charging And Controls - V6 S/C 3.0L Petrol (G1514777) >> Removal And Installation >> Fuel Pump Driver Module (G2788074) >> Installation

Fuel Pump Driver Module (G2788074): Installation

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the FPDM  .
    • Install the fastener.
  2. Connect the electrical connector.
  3. Connect the 12 V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals