LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol (G2292098) >> Removal And Installation >> Oil Cooler (G1557024) >> Installation

Oil Cooler (G1557024): Installation

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that these components are installed to the noted removal position.
    NOTE: Install new seals.
    G11285129Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Renew Part: Oil cooler O-ring seals Quantity: 1  .

  2. CAUTION: Make sure that the area around the component is clean and free of foreign material.
    NOTE: Install a new gasket.
    G11309805Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Renew Part: Oil cooler gasket Quantity: 1  .

  3. CAUTION:
    • Install all the bolts finger tight before final tightening.
    • Make sure that the area around the component is clean and free of foreign material.
    NOTE: Tighten the bolts in the indicated sequence.
    Fig 1: Oil Cooler Bolts Tightening Sequence
    G11309806Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    To install, reverse the removal procedure.

    Torque  : 13 Nm 

scientia non olet · About LEMON Manuals