LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol (G2292098) >> Removal And Installation >> Fuel Pump Camshaft (G1557238) >> Installation

Fuel Pump Camshaft (G1557238): Installation

WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    G11285338Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  2. CAUTION: Take extra care not to damage the mating faces.
    G11285337Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 12 Nm 

  3. G11286865Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 21 Nm 

  4. G11286873Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft, balance shaft and crankshaft sprocket markings.
  5. CAUTION: Make sure that the tensioner spring is correctly located.
    G11285218Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 21 Nm 

  6. Refer to: OIL PAN EXTENSION - RWD (G1557027) 

    Refer to: OIL PAN - AWD (G1569239) 

  7. Refer to: STARTUP BATTERY DISCONNECT AND CONNECT