FLEXPLATE (G1778956): Removal
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Removal steps in this procedure may contain installation details.
- Engine shown removed for clarity.
- Refer to: TRANSMISSION - V6 S/C 3.0L PETROL (G2506757)
-
CAUTION:
- The bolts can only be used 3 times, mark the bolts with a center punch. If 2 punch marks are visible, discard the bolts.
- Make sure that no components fall off during removal.
- Note the position of the bolts, prior to removal.
NOTE: Make sure that the crankshaft is not rotated.Special Tool(s): JLR-303-1304