Crankshaft Front Seal (G1557013): Removal
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some illustrations may show the engine removed for clarity.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Refer to: CRANKSHAFT PULLEY (G1851000)
Special Tool(s): 303-1434
Torque : 26 Nm