Variable Camshaft Timing
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Inlet camshaft VCT actuator |
| 2 | Exhaust camshaft VCT actuator |
| 3 | Exhaust VCT solenoid |
| 4 | Camshaft Position (CMP) sensors |
| 5 | Inlet VCT solenoid |
The timing of the inlet and exhaust camshafts can be adjusted independently by an electro-hydraulic controlled VCT system. The ECM controls the system using information from the camshaft position (CMP) sensors and the crankshaft position (CKP) sensor.
The VCT system varies the timing of the intake and exhaust camshafts to deliver optimum engine power, efficiency and emissions. The timing of the intake camshafts has a range of 62 degrees of crankshaft angle. The timing of the exhaust camshafts has a range of 50 degrees of crankshaft angle.
In the base timing position:
- The intake camshafts are fully retarded.
- The exhaust camshafts are fully advanced.