Windshield Wiper Service Position
WARNING: This page is about a different car, the 2019 Jaguar XJ and 2018 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
The wiper service position allows the windshield wipers to be parked in a position to allow easy access to the wiper blades for replacement.
NOTE:
The smart key must remain in the vehicle when the windshield wipers are in the service position.
Perform the following steps to set the windshield wipers service position:
- Make sure the ignition is switched off
- Switch the ignition on and then switch it off again
- Immediately move the wipers and washers control switch down to the flick wipe position and switch the ignition on again
- The windshield wipers will move to the service position.
To return the windshield wipers to the normal park position perform the following steps:
- Switch the ignition off
- The windshield wipers will return to the park position.