LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XJR575 >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake And Actuation -- XJ/X351 >> Parking Brake And Actuation >> General Procedures >> Electric Park Brake Release When The Vehicle Has No Electrical Power >> Adjustment

Electric Park Brake Release When The Vehicle Has No Electrical Power : Adjustment

  1. CAUTION: Install a new O-ring seal.
    NOTE: Only carry out this step if previously removed.
    G11297243Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Install the Electric Park Brake (EPB) actuator.

    Renew Part: Electric park brake actuator fitting kit Quantity: 2  .

  2. Connect the wiring harness.
  3. Install both rear wheels and tires.

    Refer to: WHEEL AND TIRE

  4. Calibrate the Electric Park Brake (EPB) using the Jaguar Land Rover approved diagnostic equipment.

    General Equipment: Jaguar Land Rover approved diagnostic equipment