Switch Response

When the mode has been enabled, the system behaves as follows:

• When the Electric Park Brake (EPB) switch is applied, the EPB mechanism applies to a partial apply force, x% of the full clamp force.
• If the switch is held in this position, the force shall be constant for 1 second. The force then increases by x% of the full clamp force.
• While the switch remains in the apply position, the clamp force increment behaviour repeats. The clamp force repeats until the EPB mechanism reaches y% of the full clamp force.
• If the EPB switch moves to neutral, the EPB shall remain at the current clamp force.

If the switch moves to the release position, the EPB shall remove all the current brake force and return to the release position with no force present.