LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Starting System - INGENIUM I4 2.0L Petrol -- XF/(X260)) >> Starting System - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Starter Motor >> Installation

Starter Motor : Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the starter motor.

    Torque  : 48 Nm 

  2. Connect the wiring harness.

    Torque  : 7 Nm 

    1. Connect the startup battery positive cable.

      Torque  : 12 Nm 

    2. Secure the cover.
  4. Install the catalytic converter.

    Refer to: CATALYTIC CONVERTER - VEHICLES WITH: NAS SPECIFICATION

  5. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals