LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Cooling - INGENIUM I4 2.0L Diesel -- XF/(X260)) >> Engine Cooling - INGENIUM I4 2.0L Diesel (G1817166) >> Removal And Installation >> Engine Coolant Level Switch (G2424486) >> Installation

Engine Coolant Level Switch (G2424486): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine coolant level switch.
  2. Connect the electrical connector.
    • Reposition the coolant expansion tank into the correct location.
    • Install and tighten the bolt.

      Torque: 7 Nm 

    • Reposition the wiring harness into the correct location.
    • Install the 6 clips.
scientia non olet · About LEMON Manuals