Oil Pump Chain (G1867695): Installation
WARNING: This page is about a different variant/trim than selected.
- CAUTION: Make sure a new oil pump sprocket bolt is installed.
- Install the oil pump chain and the gear assembly.
- Make sure that the oil pump sprocket is aligned with the oil pump shaft correctly.
- Using the special tool to hold the oil pump sprocket, install and tighten the bolt.
Special Tool(s): 205-053
Renew Part: Oil pump gear bolt Quantity: 1 .
Torque
Stage 1: 60 Nm
Stage 2: 90°
- Install the oil pan.
- Lower the vehicle.
- Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT