Oil Cooler (G1997941): Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Oil Cooler Tightening Sequence
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install a new gasket.
  Renew Part: Oil cooler gasket Quantity: 1.
- Install and tighten the bolts in the sequence illustrated.
  Torque
  
  Stage 1: 10 Nm
  
  Stage 2: 25 Nm
Connect the oil cooler hose.
Install the turbocharger.
Refer to: TURBOCHARGER (G2268876)