LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XF/(X260)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol (G2006487) >> Removal And Installation >> Rear Knock Sensor (G2031026) >> Installation

Rear Knock Sensor (G2031026): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the knock sensor.
    • Torque  : 20 Nm 
  1. Connect the electrical connector.
  2. Install the intake manifold.

    Refer to: INTAKE MANIFOLD

  3. Connect the startup battery ground cable.

Refer to: STARTUP BATTERY DISCONNECT AND CONNECT