Piston Cooling Oil Jet Solenoid (G2130910): Installation

WARNING: This page is about a different variant/trim than selected.

The following step(s) applies to:

All vehicles

- Install the Piston Cooling Jet (PCJ) Solenoid.
- Inspect the O-ring. Replace if damaged.
- Torque : 11 Nm
Connect the electrical connector.
The following step(s) applies to:

Cold climate vehicles
Install the block heater.
Refer to: BLOCK HEATER

The following step(s) applies to:

All vehicles
Install the generator.

Refer to: GENERATOR