LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Electronic Engine Controls - INGENIUM I4 2.0L Petrol -- XF/(X260)) >> Electronic Engine Controls - INGENIUM I4 2.0L Petrol (G2006487) >> Removal And Installation >> Crankshaft Position Sensor (G1998396) >> Installation

Crankshaft Position Sensor (G1998396): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the crankshaft position sensor.
    • Install and tighten the bolt.

      Torque  : 8 Nm 

    • Connect the electrical connector.
  2. Install the engine undershield.

Refer to: ENGINE UNDERSHIELD

scientia non olet · About LEMON Manuals