LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XF/(X260)) >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2006213) >> Removal And Installation >> Engine Coolant Degas Separator (G2046485) >> Installation

Engine Coolant Degas Separator (G2046485): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the coolant degas separator.

    Torque: 12 Nm 

  2. Connect the 2 lower coolant hoses.
  3. CAUTION: Inspect the seals and renew the components if damaged or worn.

    Connect the 3 upper coolant hoses.

  4. Fill the engine coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING

scientia non olet · About LEMON Manuals