Front Silencer (G2020237): Installation
WARNING: This page is about a different variant/trim than selected.
- With assistance from another technician install the exhaust center section. Tighten the 4 bolts securing the exhaust cross brace into position.
Torque : 25 Nm
-
NOTE: install a new exhaust clamp.
- Install the center exhaust system to align with the catalytic converter.
- Install a new exhaust clamp to secure the exhaust system to the catalytic assembly and tighten to the correct torque.
Renew Part: Front exhaust clamp Quantity: 1 . Part Number:
Torque : 56 Nm
- Install the left side and the right side undershields.
Torque : 7 Nm
- Install the rear silencer
Refer to: REAR SILENCER
- Lower the vehicle.