Fuel Pump - With High Pressure Exhaust Gas RECIRCULATION System (G1817178): Part(S)
WARNING: This page is about a different variant/trim than selected.
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Installation Step 2 | Fuel pump O-ring seal | 1 |
| Installation Step 4 | High pressure fuel pump retaining bolts | 1 |
| Installation Step 5 | High pressure fuel pump retaining bolts | 2 |
| Installation Step 6 | Fuel pump drive sprocket nut | 1 |
| Installation Step 11 | Fuel pump drive sprocket access cover seal | 1 |
| Installation Step 13 | Fuel rail supply pipe(s) | 1 |
| Installation Step 24 | EGR pipe to exhaust manifold gasket | 1 |