LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Electronic Engine Controls - INGENIUM I4 2.0L Diesel -- XF/(X260)) >> Electronic Engine Controls - INGENIUM I4 2.0L Diesel (G1817213) >> Removal And Installation >> Variable Camshaft Timing Solenoid (G2415554) >> Installation

Variable Camshaft Timing Solenoid (G2415554): Installation

WARNING: This page is about a different variant/trim than selected.
  1. G13973928Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Lubricate the bore with clean engine oil.

    • Install the VCT  solenoid.
    • Install and tighten the 2 bolts.

    Torque  : 9 Nm 

  3. Connect the electrical connector to the VCT  solenoid.
  4. Connect the 3 electrical connectors.
  5. Install the engine cover.

Refer to: ENGINE COVER - INGENIUM I4 2.0L DIESEL

scientia non olet · About LEMON Manuals