Variable Camshaft Timing (VCT) Solenoid
WARNING: This page is about a different variant/trim than selected.
The VCT solenoid is located on the chain cover and secured with 2 screws.
The VCT solenoid is controlled by a Pulse Width Modulation (PWM) output from the PCM. The PCM uses signals from the CMP sensor and determines the position of the VCT actuator which has a direct interface with the exhaust camshaft.
The VCT solenoid incorporates a spindle that acts on the spool valve in the VCT actuator to advance and retard the exhaust camshaft timing.