Differential Pressure Sensor - Low Pressure (LP) EGR - EU 5/6 And NAS Only
WARNING: This page is about a different variant/trim than selected.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Differential pressure sensor |
| 2 | Low pressure connection |
| 3 | High pressure connection |
The LP EGR differential pressure sensor is located on the front right of the engine. The sensor is located to a bracket which is attached to the LP EGR valve. The sensor is secured to the bracket with a screw.
The LP EGR differential pressure sensor is used by the PCM to monitor exhaust gas passing into the LP EGR cooler and compare it with exhaust gas/clean air passing though the LP EGR valve into the turbocharger.