Catalytic Converter To Turbocharger Clamp (G2782561): Installation
WARNING: This page is about a different variant/trim than selected.
-
CAUTION:
- Make sure that the mating faces are clean and free of corrosion and foreign material.
- The catalytic converter to turbocharger gasket must be installed to the orientation shown in the illustration.
Install a new catalytic converter to turbocharger gasket.
Renew Part: Catalytic converter to turbocharger gasket Quantity: 1 .
-
- Install a new clamp.
Renew Part: Catalytic converter to turbocharger clamp Quantity: 1 .
- Install and tighten the nut.
Torque: 13 Nm
- Install a new clamp.
-
- Install the heatshield.
- Install and tighten the 5 bolts.
Torque: 10 Nm
- Install the engine cover.