Transmission Fluid Cooler (G1862910): Removal
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
- Be prepared to collect escaping fluids.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: TRANSMISSION FLUID DRAIN AND REFILL
- Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING
Torque : 5Nm