LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 283 (Engine Ignition - V6 S/C 3.0L Petrol -- XE/(760)) >> Engine Ignition - V6 S/C 3.0L Petrol (G1823024) >> Removal And Installation >> Ignition Coil-On-Plug (G1822892) >> Installation

Ignition Coil-On-Plug (G1822892): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11307690Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 7Nm 

  2. G11307689Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  3. G11308064Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  4. G11308063Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  5. G11308062Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Torque  : 7Nm 

  6. G11308061Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  7. CAUTION: To prevent contamination, make sure to install the oil filler cap after removing the sound proofing pad.
    G11308060Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  8. G11308059Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  9. Install the engine cover.

    Refer to: ENGINE COVER - V6 S/C 3.0L PETROL

  10. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals