Automatic Speed Limiter

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The Automatic Speed Limiter (ASL) indicator will illuminate when the ASL has been selected. The system speed is set using the speed control SET '+' and '-' switches. The selected speed is displayed in the Instrument Cluster (IC). The set speed can be adjusted at any time using the speed control '+' or '-' switches. ASL can be suspended by operating the 'CANCEL' switch.

ASL can be resumed by operating the 'RES' switch, when:

The vehicle speed is at the previously set ASL speed
The vehicle speed is up to a maximum of 30 km/h (19 mph) above the previous set speed.

If the vehicle speed is too high to resume ASL operation, a message will be displayed in the IC.

The ASL system allows full driver control of the vehicle speed up to the set speed. The speed limiter will restrict the vehicle speed and will not allow the speed to go over the set limit. If the driver fully depresses the accelerator pedal, ASL will be temporarily overridden.