Roof Opening Panel (G1818387): Overview
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
You can operate the roof opening panel by pressing a two-way rocker switch located in the roof console. The front and the rear of the switch has a two-stage operation so that you can either partially or fully tilt, open and close the panel.
Two motors are located at the front of the roof opening panel assembly. One of them powers the roof opening panel blind while the other powers the roof opening panel.
An air deflector is deployed when the roof opening panel is open.
CAUTION:
To prevent accidental damage, make sure that any roof rack load will not interfere with the opening of the roof opening panel.
You can partially or fully open or close a blind, which is integrated into the roof opening panel frame, by using a switch located in the roof console.