Raising And Opening The Roof Opening Panel
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- You can stop the panel from raising or opening at any point by pressing the switch again.
- If the roof opening panel blind is closed, pressing the roof opening panel switch also opens the blind when you open the roof opening panel.
With the roof opening panel closed, lightly press and hold the rear of the roof opening panel rocker switch to partially or fully raise the roof panel upwards to the tilt position you want. Press and hold the rear of the switch again to partially or fully open the panel.
Alternatively, press fully and then release the rear of the rocker switch. This opens and tilts the panel to the fully raised position automatically. Press and then release the rear of the rocker switch again to move the panel to the fully open position.