Lowering And Closing The Roof Opening Panel
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
You can stop the panel from lowering or closing at any point by pressing the switch again.
With the roof opening panel raised and open, lightly press and hold the front of the roof opening panel rocker switch to partially or fully lower the roof panel downward to the tilt position you want. Press and hold the rear of the switch again to partially or fully close the panel.
Alternatively, press fully and then release the front of the rocker switch. This lowers the panel to the fully lowered position automatically. Press and then release the front of the rocker switch again to move the panel to the fully closed position.