Brake Disc (G1822057): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION: Make sure that the mating faces are clean and free of foreign material.
Clean the brake disc using brake cleaning fluid.
-
NOTE: Install new brake caliper anchor plate retaining bolts.
To install, reverse the removal procedure.
- Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top-up with brake fluid if necessary.
- Calibrate the electric parking brake (EPB) using the diagnostic tool.
-
NOTE: This step is only required if the diagnostic tool is not available.
Refer to: ELECTRIC PARK BRAKE SERVICE MODE ACTIVATION AND DEACTIVATION
-
NOTE: This step is only required if the vehicle has no battery power.
Refer to: ELECTRIC PARK BRAKE RELEASE WHEN THE VEHICLE HAS NO ELECTRICAL POWER