Pinpoint Test C: Body Control Module (BCM) Diagnostic Trouble Code Checks
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- C1: CHECK DIAGNOSTIC TROUBLE CODES B1380-16, B1380-17 OR B1380-49 NOTE: For additional information on the BCM DTC s, refer the to the BCM DTC table in this procedure.
- Using the Jaguar Land Rover (JLR) approved diagnostic equipment, check the BCM for related DTC (LIN or heated steering wheel DTC ).
Are the following DTC B1380-16, B1380-17 or B1380-49 set in the body control module (BCM)?
Yes
GO to PINPOINT TEST D .
No
GO to C2
- C2: CHECK DIAGNOSTIC TROUBLE CODES B1380-87 OR B13BD-87 NOTE: For additional information on the BCM DTC s, refer the to the BCM DTC table in this procedure.
- Using the JLR approved diagnostic equipment, check the BCM for related DTC (LIN or heated steering wheel DTC ).
Are the following DTC B1380-87 or B13BD-87 set in the body control module (BCM)?
Yes
GO to PINPOINT TEST E .
No
GO to PINPOINT TEST D .