Steering Column - Electric Adjustment
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
With the ignition on or off and the steering column adjustment switch in either the AUTO or COLUMN position, tilting the switch causes the upper column to move in the corresponding direction.
On vehicles with the seat memory function, column adjustment is an integral part of the driver position memory system and also incorporates an easy entry/exit mode to allow the driver additional room to enter and exit the vehicle.
The Body Control Module/Gateway Module (BCM/GWM) assembly controls the steering column adjustment from the following inputs:
- Steering column adjustment switch - located in the lower shroud.
- Driver Seat Module (DSM) if seat memory feature is available.