LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Glass, Frames And Mechanisms -- XE/(760)) >> Glass, Frames And Mechanisms (G1823239) >> Description And Operation >> Glass, Frames and Mechanisms - Project 8 >> Overview >> Windshield And Rear Window

Windshield And Rear Window

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The bracket of the IPMA  is not serviceable and it is glued to the windshield. When the bracket is broken, the whole windshield must be replaced.

The laminated window is bonded and sealed to the body aperture using polyurethane adhesive.

The toughened rear window is also bonded and sealed to the tailgate aperture using polyurethane adhesive. A single heating element is printed on the inner surface of the rear window.

scientia non olet · About LEMON Manuals