LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Instrument Panel And Console -- XE/(760)) >> Instrument Panel And Console (G1868604) >> Diagnosis And Testing >> Interior Trim Inspection (G2743611) >> Warranty Compliance And Procedures In Relation To High Gloss Veneers

Warranty Compliance And Procedures In Relation To High Gloss Veneers

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Particular care should be taken to prevent damage from rings, studs, zips and buckles

Where there is clear evidence that any high gloss veneer has sustained damage due to severe scratching, abrasions or other impact damage, retailers should note that this form of damage is regarded as wear and tear and, therefore rectification of this damage is NOT  claimable under any of the vehicle warranties. Further information can be found in (B1.7) (Warranty Terms And Conditions - Summary of Vehicle Warranty - What is Not Covered By The Vehicle Warranty) in the Global Warranty Compliance And Procedures Information, which can be found under "Warranty Information" of the "Retailer Standards and Training Documents" on TOPIx.