GLOVEBOX (G2259746): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
- Connect the 2 electrical connectors.
- Install the glovebox.
- Install and tighten the 7 screws.
- Install and tighten the 3 screws.
- Install the instrument panel side trim.
- Install the front door aperture seal.
-
- Install the instrument panel lower trim.
- Install and tighten the 3 screws.