LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 266 (Exhaust System - INGENIUM I4 2.0L Petrol -- XE/(760)) >> Exhaust System - INGENIUM I4 2.0L Petrol (G2006676) >> Removal And Installation >> Front Silencer (G2020237) >> Installation

Front Silencer (G2020237): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. With assistance from another technician install the exhaust center section. Tighten the 4 bolts securing the exhaust cross brace into position.

    Torque  : 25Nm 

  2. NOTE: install a new exhaust clamp.
    • Install the center exhaust system to align with the catalytic converter.
    • Install a new exhaust clamp to secure the exhaust system to the catalytic assembly and tighten to the correct torque.

    Renew Part: Front exhaust clamp Quantity  : 1.  Part Number:

    Torque  : 56Nm 

  3. Install the left side and the right side undershields.

    Torque  : 7Nm 

  4. Install the rear silencer

    Refer to: REAR SILENCER 

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals