INCONTROL Touch 11 Speaker Systems
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The InControl Touch 11 speaker system uses an external Audio Amplifier Module (AAM). The speakers for these systems are connected directly to the AAM.
Audio signals originate from the AHU and are passed to the AAM via hardwired connections. The speakers are connected directly to the AAM.
Audio signals can also be generated by other vehicle systems which are passed to the AHU on the HS CAN comfort systems bus. The AHU processes the signals and passes the output to the AAM via hardwired connections.
The AHU receives a fused power supply from the Battery Junction Box (BJB), via the Quiescent Current Control Module (QCCM). The AAM receives a permanent fused power supply from the Rear Junction Box (RJB).