Spark Plugs (G2244126): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Clean all the mating faces and reusable parts thoroughly and check for damage.
Check the spark plug gap, refer to specifications.
Refer to: SPECIFICATIONS
-
CAUTION:
- If accidentally dropped or knocked install a new spark plug.
- Following installation of the spark plugs in the cylinder head visually inspect the paint mark on the terminal of the spark plug for correct orientation. The head of the T paint mark must face the fuel injector within ± 45°.
Use the special tool to install and tighten the 8 spark plugs.
Special Tool(s): 303-1450
Torque : 22.5Nm
- Install the 8 Ignition coil on-plugs.
Refer to: IGNITION COIL-ON-PLUG