LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Engine Ignition - V8 S/C 5.0L Petrol, Project 8 -- XE/(760)) >> Engine Ignition - V8 S/C 5.0L Petrol, Project 8 (G2261489) >> Removal And Installation >> Ignition Coil-On-Plug (G2244125) >> Installation

Ignition Coil-On-Plug (G2244125): Installation

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the ignition coil-on-plug.
    • Install the bolt.

      Torque  : 7Nm 

  2. Connect the electrical connector.
  3. Repeat steps  1 and 2 for the remaining ignition coil-on-plugs for Bank 2
    • Remove the oil filler cap.
    • Install the Noise, Vibration and Harshness (NVH) material.
    • Install the oil filler cap.
  5. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals